Impulse Winding Tester TH2883-5

1.First LXI winding tester 2.Up to 200Msps sampling rate 3.Breakdown meausurement 4.High-fidelity corona extraction algorithm

Features

First LXI winding tester65k color 7'' TFT wide display screenUp to 200Msps sampling rateMeasuring speed: 10meas/sec6kB memory depthHigh-fidelity corona extraction algorithm ( patent technology)Four waveform comparison methodsAutomatic storage of parametersMeasurements on voltage, time and frequencyPan and zoom of waveformsAverage times: 0 to 32destructive testing for your correct choose of voltageUse demagnetizing impulse to ensure the conformity of test resultsAutomatic sampling of standard waveform20 setup files can be stored and automatically loadedWaveforms can be stored in USB disk.Instrument firmware can be automatically upgraded through USBChinese and English Operation languagesThree user's operation display availableFoot-control interface for fast measurementHandler interface can be used in automatic production lineRS232C,USB Device and LAN to realize remote control

Details

TFT wide display: best visualization of signal

High-fidelity corona extraction technology: extract more reliable corona

TH2883 series adopts a new patent technology---high-fidelity corona extraction technology, developed by Tonghui. Coronas extracted through this method reflect the real coronas generated in the process of winding test without any lose. A traditional method for corona detection in other products is to calculate the waveform-sampling area by integral methods. Due to the different integral areas, the result of integration can be different as well. Therefore, it is impossible to judge the corona generated by the same coil product under the same test condition, which will result in different detection results. TH2883 series first achieves to extract corona without distortion on the impulse winding tester. With no doubt, the test result is reliable.

Fast storage of graphs: Never worry that you fail to store measurement waveform in time. 

LXI Standard: remote control for your convenience

Multiple I/O interfaces of RS232C,USB Device and LAN: for your convenience and flexibility

Standard waveform automatic: your helpful assistant

Destructive testing: for suitable impulse testing voltage

Destructive testing does not really mean to destroy products under test but to choose a more suitable impulse testing voltage for the product. Some operators may not know how high an impulse voltage should be applied across the products. If the voltage is too low, the test results will not be as good as expected; if the voltage is too high, defective rate will increase. Destructive testing will help you to solve above problems. All you need do is to set the starting voltage, terminating voltage and step voltage. Then TH2883 series will automatically find out the critical voltage of corona discharge according to the change of corona of DUT and you can determine your impulse testing voltage based on the critical voltage. It is recommended that the impulse testing voltage be 70% of the critical voltage.

Data Sheet

Specifications
Impulse Voltage		100V~5000V with a 10V resolution Accuracy:±2%
Inductance Range		≥10uH
Impulse Energy		Max.:0.25 Joule
Measuring Speed		6 meas/sec
Pulses Applied		Max. 99
Input Impedance		5MΩ
Display		800x600 dots,65k color TFT, Waveform Display Dots: 600x256
Waveform Acquisition		8 Sampling Rates: Max. 200Msps, adjustable Resolution: 8 Bits Memory Depth: 6k Bytes Average: 1 to 32
Comparison Methods		Comparison with Standard Waveform:  1.Area Size Comparison  2.Differential Area Comparison  3.Corona Discharge Comparison 4.Differential Phase Comparison
Waveform Measurement		Voltage/Frequency/Time
Trigger Mode		Manual/External/Bus
Detection Output		OK/NG display/LED indicators/Sound Alarm
Measurement Statistics		Statistics for measurement results
Memory		20 standard waveforms can be stored in internal non-volatile memory. USB flash memory can be used as external memory.
Interface		Handler,RS232C,USB Device, USB Host,Lan
Power
Power Supply		110V/220V±10%  50Hz/60Hz±5%
Power Consumption		≤200VA
General Specifications
Working environment	Temperature		0°C - 40°C
	Humidity		≤75% R.H.
Weight			15Kg
Dimensions (H x W x D)			132mmx400mmx390mm
Safety and EMC			IEC61010-1:2001,IEC61326-2-1:2005

Impulse Winding Tester TH2883-5